615mm wide x 3000mm long, with a 40mm profile thickness. Featuring a maximum capacity of 2025kg, the TRP40 Series Car Ramp is a super thin and lightweight aluminium ramp ideally suited for customers with a low load height. Perfect for loading cars with low ground clearance onto low steps or up kerbs/steep driveways. Price and capacity stated is for the PAIR.
Car Ramps (3000x615x2025kg)
Length (mm)
3000
Width (mm)
615
Max Load Height (mm)
450
Weight per Ramp (kg)
38
Weight Per Pair (kg)
76
Capacity (kg)
2025
Ramp Capacity, Length & Load Height
This guide should help you gauge how long a ramp you require, so if you're in any doubt read the details below. If you still have questions after reading, feel free to give us a call. The crucial thing to know is your load height.
Load Height: this is the vertical measurement from the ground to where you rest the ramp onto.
Guide to the maximum load height is shown in the product description/table, please note the minimum Load Height will be 5% below the maximum height stated on the ramp, to calculate use (maximum load height - 5% = minimum load height).
For vehicle ramps EU guidelines recommend that no ramps with a gradient greater than 30% or 1:3.3 should be used. Essentially the load heightx 3.3,gives you your ramp length. Furthermore no TUV Certified Ramp is designed to exceed this gradient. Going over this gradient is can cause accident, injury or death and may invalidate the warranty.
Please check the wheelbase measurement of the machine you are loading is suitable for the capacity the ramp can take based on the wheelbase measurement advised. To check your wheelbase, look at the vehicle from side view, the distance between the centre of front wheel and rear wheel (rim centre) is your wheelbase.
For machines with an unbalanced weight distribution such as, scissors lifts, paving machinery, steel tracked machinery and machines with low ground clearance we would advise you contact us first, so we can check and advise on the most suitable solution.
For loading cars and other vehicles with either a) Low ground clearance b) Front and/or Rear overhang a gentler gradient is recommended (this will vary depending upon the vehicle). Please also note that most forklifts and pallet trucks are not built to be used on slopes. Please check the manual for the gradient information.
Further information can be seen in this blog article here
At only 40mm thick the TRP40 Series is a super thin and lightweight aluminium ramp ideally suited for customers with a low load height. Perfect for loading cars with low ground clearance onto low steps or up kerbs/steep driveways.
These ramps are only available without edges
Four different connection options available, however the default connection is the rest on connection
Custom load heights available
Quotes for bespoke alloy car loading ramps can be supplied on request
Made in Europe
Anti-slip surface
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement
Quotes for bespoke ramps can be supplied on request
Not suitable for solid wheels found on road surfacing machines - for this type of machinery please see the industrial ramps for steel tracks
Easily load your car into containers, up kerbs and into a van with our extensive range of car ramps. Customisable solutions available. Solutions for classic cars and sports cars...
Whether you’ve just invested in the classic car of your dreams or considering lowering your vehicle as part of some upcoming modifications, you might find car ramps become an essential weapon in your garage arsenal. Of course, even experts can forget best practices for using car ramps. Whether you’re new the world of car enthusiasts or just ...
We’ve already seen how our basic car ramps can be essential in transporting and parking a range of classic sports cars, but sometimes we get an order that requires something more. Fortunately, our range doesn’t just stop at our car ramps. In fact, we’ve got a huge range of vehicle ramps to help load everything from heavy machinery to steel ...