Main features:

• Suitable for cars and light commercial vehicles only
• Maximum speed 5mph 
• Promotes one-way traffic flow, for example in private car parks 
• Surface fixed, making it easy to install or relocate. Each plate requires 7 fixings, fixings for tarmac and concrete and a drill bit are provided free of charge 
• Yellow for high visibility
• The height of the flow plate is 88mm, when the locking bolt is used the height is 40mm
• Maximum 1 ton per axle (for heavier vehicles see HGV flow plates)
• Suitable for use in multi-story buildings, as will not penetrate the membrane
• Should be used in conjunction with Speed Bumps and Warning Signage

This flow plate is designed to be used at speeds of up to 5mph to encourage the traffic to flow in one direction. The plate is supplied with fixings to allow this to easily be bolted into concrete and/or tarmac. The plate should not be used in areas with pedestrian traffic and should be used in conjunction with speed bumps or other traffic calming products.

This product is only suitable for cars and light commercial vehicles up to a maximum of 1 ton per axel. TRP Standard flow plates are bolted to the surface using 7 fixing bolts which makes this a good solution for multi-story car parks and areas where excavation is not possible.

Flow plates are not recommended to be used in pedestrian areas. For pedestrian and vehicle traffic we would instead recommend viewing our speed bump kits. 

All pictures shown are for illustration purposes only. The actual product may vary due to product enhancement.