
Heavy Duty Flow Plates
Our heavy-duty flow plates are suitable for all vehicle types, from cars to 30 ton HGVs making them perfect for car parks and industrial estates. Designed to slow the speeds of passing vehicles and encourage the flow of one-way traffic. These flow plates are commonly used to discourage drivers from entering certain areas or exiting out of the entrance.
The heavy-duty flow plates feature a spring mechanism that ensures the plate stays in an upright position for optimal performance. Installation is straightforward, with each plate featuring 7 fixing holes for easy and secure placement.
Fixings for tarmac and concrete and a drill bit are supplied free of charge.
The flow plates are also supplied with a locking bolt so the ramp can be temporarily held down to allow traffic to flow in both directions when needed.
Please note, these should be used in conjunction with Speed Bumps and Warning Signs
Heavy Duty Flow Plate:
- Suitable for cars and HGV vehicles up to 30,000kg, maximum of 15,000kg per axle
- Slows vehicle speeds and promotes one-way traffic flow, maximum speed 5mph
- Surface fixed, making it easy to install or relocate. Each plate requires 7 fixings.
- Fixings for concrete and tarmac are provided free of charge along with a drill bit
- Provided in yellow for high visibility
- Chequered surface for optimum grip
- Durable design produced from steel. Hot dip galvanised and powder-coated surface
- The height of the flow plate is 105mm, when the locking bolt is used the height is 40mm
- Suitable for use in multi-story buildings, as will not penetrate membrane
- Should be used in conjunction with Speed Bumps and Warning Signs
- Fixings for tarmac and concrete are provided
This flow plate is designed to be used at speeds of up to 5mph to encourage the traffic to flow in one direction. The plate is supplied with fixings to allow this to easily be bolted into concrete and/or tarmac. The plate should not be used in areas with pedestrian traffic and should be used in conjunction with speed bumps or other traffic calming products.
HGV flow plates are suitable for use in areas of high traffic flow and can be used by all types of vehicles from cars to 30 ton HGV’s. This product is manufactured from a heavy duty gauge chequer plate, high tensile springs, and the extra wide plate.
It is important that flow plates are driven over in a straight line, vehicles should not approach or drive over the flow plates at an angle.
Flow plates are not recommended to be used in pedestrian areas. For pedestrian and vehicle traffic we would instead recommend viewing our speed bump kits.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
SKU | TRP-MSH20 |
---|---|
Capacity (kg) | 30,000 |
Folded Height (mm) | 55 |
Height (mm) | 105 |
Length (mm) | 390 |
Weight per Ramp (kg) | 20 |
Width (mm) | 400 (base) / 550 (plate) |
One Year Warranty | Yes |
Bolt Down | Yes |
Bulk Prices Available | Yes |
Easy to Fit | Yes |
Fixings Included | Yes |
High Visability | Yes |

Flow Plates: Controlling The Direction of Traffic

The Highways Road Humps Regulations: Speed Bump Safety
