Saturday Delivery ‐ AVAILABLE
Folding Drive In Ramp up to 150mm load height
Suitable for temporary and permanent use, this two-part version of the drive-in ramp is a great option for those wishing to safely overcome uPVC doorways, sliding doors, patio doors and thresholds. Easy to use and perfect for those who do not wish to lift the ramp each time. Simply flip the inner ramp into position to bridge the doorway. The height of the lightweight threshold ramp can be used on a variety of heights up to 150mm and can be easily adjusted to your threshold height.
- Lightweight at only 10 - 13kg
- Easy to use, simply adjust the legs to your preferred height, flip over the doorway and start using
- Designed to allow mobility aids to overcome doorways and threshold, perfect for manual wheelchairs, electric wheelchairs, scooters and walkers
- Suitable for doorways where the height varies on either side of the threshold
- Simply flip the entry plate back onto the main ramp to allow you to close the door
- Made to bridge door sills and frames allowing you to close the door
- Ideal for uPVC doorways including patio doors
- Portable design, lightweight and folding
- Capacity up to 300kg
- Easily and safely adapt to the obstacle, by height adjustment up to 150mm
- The surface of corrugated sheet offers you through the formations a very good skid resistance
- Safety edges on the main ramp
- Removing the ramp when the door has to be closed is not necessary, the tail is simply folded up
- Suitable to be left outside
- The entry plate (shorter ramp length) is 450mm long and has a maximum load height of 75mm
- For the 80mm high ramp, the main ramp is 800mm long. For the 150mm high ramp, the main ramp is 1250mm long
- Made in Europe
- 3 year warranty
- All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement
- Due to the safety edges this product might not work well on outwards opening doors
- For higher heights view our adjustable threshold ramps with entry plate
- These ramps are only suitable for use as mobility aids
This ramp is classified as a Class 1 Medical Device - view the declaration of conformity here.
Description
Designed for uPVC doorways and patio doors, the premium Swedish-manufactured Drive-In Ramp provides a simple solution for overcoming door thresholds, which can be used as a portable ramp or left in place. Due to the hinged design, the ramp can be left in situ, removing the need for repeated lifting and positioning, making it ideal for users who want greater independence or find lifting ramps difficult. With a 300kg capacity, the ramp is perfect for wheelchairs, mobility scooters and walkers.
Due to the safety edges, this product might not work well on outward-opening doors.
Key Features
Height adjustable
Set the support legs to your preferred height for a comfortable transition over the doorway.


Bridge door thresholds
Bridge door thresholds whilst protecting the doorframe from the weight of the mobility aid.


Chequered anti-slip surface
Full-width chequered plate anti-slip surface and safety edges for enhanced safety.


Hinged design
When not in use, flip the smaller ramp onto the main ramp to close the door whilst the ramp is in situ.


Product Highlights
Independently navigate uPVC doorways and thresholds
To use the ramp, simply flip the inner section over the doorway. When not in use, fold the inner ramp back onto the main ramp and close the door as normal.
The inner ramp features a pre-drilled hole, allowing a handle to be fitted for users who struggle or unable to bend down and for those who struggle to lift the weight of the ramp. This makes it easier to operate the ramp and enables safe, independent access in and out of the property.




Seamless, safe transition over the doorway
The ramp can be easily adjusted to suit the height of your doorway or threshold, allowing you to safely bridge uneven access points. It provides a smooth, seamless transition from ground level onto the ramp and is ideal for areas where the height differs on either side of the threshold.
The entry plate (inner shorter ramp length) is 450mm long and has a maximum load height of 75mm.
For the 80mm high ramp, the main ramp is 800mm long. For the 150mm high ramp, the main ramp is 1250mm long.
Temporary or semi-permanent use
Perfect for indoor or outdoor use, the aluminium ramp is lightweight and folds for storage . Alternatively, if you wish to leave the ramp in position, simply flip the inner ramp onto the main ramp and close the door.


Why Choose The Ramp People?
The Ramp People is ISO 9001 certified and a proud member of the BHTA. With over 8,000 five‑star TrustPilot reviews, we are committed to delivering quality products and exceptional customer service.
The premium Drive In Ramp is manufactured in Sweden to the highest standards and offered with a 3-year warranty along with a 60-days return period for peace of mind.
Additional Information
This ramp is classified as a Class 1 Medical Device - view the declaration of conformity here.


| SKU | TRP-DRIVE |
|---|---|
| Capacity (kg) | 300 |
| Height (mm) | 10 |
| Length (mm) | 800 |
| Length Section (mm) | 450 |
| Max Load Height (mm) | 150 |
| Min. Load Height (mm) | 50 |
| Total Width (mm) | 750 |
| Weight (kg) | 10 |
| Three Year Warranty | Yes |
| Easy to Fit | Yes |
| Electric Wheelchair | Yes |
| European Made | Yes |
| Manual Wheelchair | Yes |
| Mobility Scooter Friendly | Yes |
| Leave Outside | Yes |
| Colour Option | Black |
The Butterfly Ramp - Overcome Doorways and Thresholds
Choose Our Adjustable Threshold Ramps This Summer
































